Programmer Units

A portable device with a small screen displaying the words 'MEGACON KCG5955', buttons with arrows, and a connected cable labeled 'LUBRICANT'.
A handheld electronic device with a small screen, buttons with arrows, and connected colored cables.

HHP1 and HHP2 - Hand held Programmer Unit

Programming of KCG59x series can be achieved using Megacon’s universal Programmer HHP1 or HHP2.

The ID-protected programmer is powered directly from the unit and is used to program the parameters of any unit within the IS range.

When plugged into the unit, the parameters unique to the unit will be displayed.

The HHP2 can also be used via the interface USB port to laptop computers.

The HHPx will comfortably fit into a pocket.

Programming of KCG59xx can also be achieved using Megacon's configuration software. The optional HHP2 must be used to interface to laptop computers.

Diagram showing a communication setup with a KCG59X device connected via RS-485 to an HHP2 device, which is connected via USB to a laptop.
Open laptop displaying megacon control interface with various settings and indicators.
Electronic control modules and a remote control device with a digital display and arrow buttons.
Electrical testing device with black box and digital interface connected by red cables
Back to Generator Guards & Controllers
View all products